High Volume Low Pressure Pumps
These are Special Order items (not usually in stock) therefore contact our store to order them. Shipping may take an extra three days.
1" General Purpose Water Pump
Specifications:
Engine: 1.5 HP Honda GX25 4 Stroke
Pump: Centrifugal Aluminum
Max Flow: 34 GPM
Max Head: 96 Ft/ 38 PSI
Max Draw: 25 ft./10 PSI
Impeller: Aluminum
Solids: No
Weight: 14.3 lbs
Part Number 93901
2" General Purpose Water Pump
Specifications:
Engine: 4.0 HP GX120 Honda Oil Alert
Pump: Centrifugal Aluminum
Max Flow: 150 GPM
Max Head: 105 ft./ 42 PSI
Max Draw: 26 ft./ 10 PSI
Impeller: Cast Iron
Solids: No
Weight: 55 lbs.
Part Number 93902
2" General Purpose Water Pump
Specifications
Engine: 5.0 HP GC160 Honda
Pump: Centrifugal Aluminum
Max Flow: 150 GPM
Max Head: 105 ft./ 40 PSI
Max Draw: 26 ft./ 10 PSI
Impeller: Cast Iron
Solids: No
Weight: 55 lbs.
Part Number 93903
3" General Purpose Water Pump
Specifications
Engine: 5.5 HP GX160 Honda Oil Alert
Pump: Centrifugal Aluminum
Max Flow: 265 GPM
Max Head: 105 ft./ 40 PSI
Max Draw: 26 ft./ 10 PSI
Impeller: Cast Iron
Solids: No
Weight: 65 lbs.
Part Number 93904
3" Trash PumpThis pump is built to move debris along with the water!
Specifications
Engine: 8.0 HP GX Honda Oil Alert
Pump: Centrifugal Aluminum
Max Flow: 286 GPM
Max Head: 98 ft./ 38 PSI
Max Draw: 26 ft./ 10 PSI
Impeller: Cast Iron
Solids: Up to 1" dia
Weight: 130 lbs.
Part Number 93909
SHURflo Pumps
The 8000 Series SHURflo pump is the most widely used industrial pump on the market. These are "on-demand" pumps, which means that they only run when there is a demand for flow.
These pumps are self-priming, and can run dry without damage to the pump.
This is a self-contained unit with the pump and motor combined. Always position these pumps with the wet end down, so that any leak will not damage the motor itself.
These pumps are available in 12-Volt DC models as well as a 120-Volt AC model. If you intend to run chemicals through your SHURflo pump, we recommend that you order a Viton Kit to make it chemical-resistant.
12-Volt DC SHURflo Pump, 1.23 GPM @ 60 PSI
Part Number 3095
12-Volt DC SHURflo Pump, 1.6 GPM @ 100 PSI
Part Number 6751
120-Volt AC SHURflo Pump, .94 GPM @ 60 PSI
Part Number 3096
Viton Valve Kit for SHURflo Pump
Part Number 3098
Replacement EPDM Valve Kit for SHURflo Pump
Part Number 3097
Replacement Santoprene Diaphrarm for SHURflo Pump
Part Number 3099
Flo-Jet Pumps
Duplex II Flo-Jet positive displacement pumps are "on-demand" pumps that are self-priming, can run dry without damage, are available with chemical-resistant parts, feature a backflow preventer, and a heavy-duty ball bearing drive system.
Flo-Jet pumps are rated at 1.5 GPM and 60 PSI. Always install with the wet end down to prevent damage to the motor in the event of a leak.
12-Volt DC Flo-Jet Pump with EPDM Valves Standard model.
Part Number 6531
12-Volt DC Flo-Jet Pump with Viton Valves For handling chemicals.
Part Number 6530
120-Volt AC Flo-Jet Pump with EPDM Valves Standard model.
Part Number 6533
120-Volt AC Flo-Jet Pump with Viton Valves For handling chemicals.
Part Number 6532
Replacement Motor for Flo-Jet Pump, 12-Volt DC
Part Number 6534
Replacement Motor for Flo-Jet Pump, 120-Volt AC
Part Number 6535
Replacement Switch Kit for these Flo-Jet Pumps
Part Number 6536
"Sun Brite" is a registered trademark of Sun Brite, Inc.
Contents of site protected © 2003-2005 Sun Brite, Inc. All rights reserved.
